Even though this 1930s pink tile is cracked, it is away from any water sources and can safely be left as is.
Don’t have the budget, time, or skill set to retile your bathroom? Good news, you may not need to! While tile can start to wear or look dated after a handful of years, the tile itself is generally resilient. Here are some things to consider when deciding what action needs to be taken.
What material is the tile?
Porcelain or ceramic
Natural stone – marble, travertine, quartz, granite, etc.
Glass, metal, or high sheen materials
Regrout
Porcelain or ceramic can be easily refreshed with a new grout joint. This is an easy DIY task with a little elbow grease. The existing grout (chipped, cracked, missing, etc.) can be chiseled out and replaced while keeping the field tile intact.
Ceramic and porcelain tiles are not porous, so a sealer is not necessary for the tile. Grout will always need a sealer applied. Be sure to refer to the instructions on your grout packaging.
Reseal
Resealing is an option for natural stone and grout. Natural stone is porous, therefore prone to stains. Sediment can seep into the pores if the tile is improperly sealed or is due for a reseal.
If the tile is already stained, products such as liquid stain removers or a paste-like poultice that can help to extract stains out of installed tile.
To prevent future staining, all-natural stone tile and countertops should be sealed upon installation and then resealed every 5-10 years. Always consult the directions on your bottle of sealer. Sealer is applied by putting it on the tile, letting it soak into the pores, then wiping away any excess. It is important to understand that you cannot ‘over seal’ tile leading to damage, just that over sealing leads to a waste in the sealer. When the pores are saturated with the sealer, no additional sealer will ‘fit’…. And neither will the coffee you spill on the floor.
Recolor
You can replace grout surrounding glass tile, but glass tile is more fragile so the likeliness of chipping the tile is higher. This could be an opportunity to recolor the grout. Grout paints, or similar, are available to rejuvenate the look of your grout. Many times, they also act as a sealer. Recoloring products can be used with porcelain and ceramic tiles as well. Natural stone should be more carefully considered as some colors may stain the tile.
This cracked tile is located along a shower wall where moisture might seep through. Because of the potential for mold to form behind the tile, or damage to occur to the underlayment, this tile should be replaced.
What if my tile is damaged?
Cracked or chipped tile should be examined on a case by case basis. If the edge of the tile is chipped, it may be easy to add grout into the gap, making the grout line a little wider.
If the tile is cracked and installed in a wet area (shower or bath surround), consider replacing it if possible. Cracked tile can allow moisture to seep through, creating patches of mold behind the tile or damaging the underlayment.
If the cracked or chipped tile is in a dry area, it may be okay to let it be until all tile is replaced.
Maintenance and Prevention
While tile is durable, care should be taken when cleaning it. Acidic cleaners should be avoided for polished natural stone, as this strips the polish.